Skip Navigation Website Accessibility
 


Quilters Select Print & Piece Paper 25 sheets

For paper or foundation piecing:

  • If possible, set your printer’s paper feed settings to “Decorative or Heavy Paper.” If your printer does not have this setting, load only one sheet of Print & Piece at a time.
  • Copy or print your favorite foundation or paper-piecing pattern directly onto Print & Piece stabilizer.
  • Cover the numbered sections as directed with your favorite fabrics until the block is complete.
  • Remove the stabilizer: once the stitching is complete, lightly dampen only the stitching lines with a wet sponge or cotton swab – the stabilizer tears away gently without distorting the stitches!
  • You can alternately leave the stabilizer within the block completely. When the quilt is laundered, the watersoluble fibers will dissolve and the non-soluble fibers will leave behind a very subtle loft. Create a test block with this method before applying it to an entire quilt to make
    sure you are happy with the results!

For stabilizing decorative or satin stitches:

  • Place one layer of Print & Piece directly under fabric and stitch.
  • To remove the stabilizer, lightly dampen only the stitching with a sponge or cotton swab – the stabilizer will pull away without distorting delicate heirloom, satin or decorative stitches!

Washer and Dryer Safe

Cool water and low drying temperature recommended.

Press using a medium setting on your iron.

  • 408 W Spring St, Brownstown, IN  47220
  • Ph: (812) 358-1734
  • Hours: T-F: 9a-5p, Thurs. 9a-6p, 4th Sat. 9 -noon
  • scrappypatches.com